Stratos 226cc thermal unit was born as a road update for a purely racing cylinder. Thanks to the lamellar it turns out to be a brilliant cylinder, ready from the low regimes. Stratos 226cc is made of cast aluminum with a high hardness chrome nickel treated barrel. Stratos 226cc Lamellare is the top of the range thermal unit created by the Stratos Racing Line R&D department.
Thanks to the specific radial copper gasket it is possible to obtain the maximum compression yield by decreasing the squish height up to 0.9 / 1.0 mm; maintaining the working temperature perfectly unchanged thus guaranteeing maximum power and reliability.
Features of the Stratos 226cc:
- Lamellar suction with integrated downflow. Ultra-tested lamellar pack with a cusp and vetronite petals to ensure a linear and homogeneous delivery.
- Round drain (type TS1) with flow modeling.
- 6 transfers with different heights between primary, secondary and tertiary so as to guarantee maximum filling of the combustion chamber in the shortest possible time.
The kit consists of:
- 1 – STRATOS cylinder in aluminum 226cc
- 1 – graphite forged BORGO piston with lateral lightening holes Ø 70.00 mm
- 1 – Stratos DP red head with specific self-centering bushes
- 1 – brass head nuts set
- 1 – racing lamellar pack
- 1 – intake manifold complete with screws and washers. The manifold is for 26/30 or 32/35 carburetors (communicate this when ordering)
- 1 – radial head gasket in annealed copper
- 1 – cylinder base gasket 0.5 mm thick
- 1 – cylinder base gasket thickness 0.8 mm
- 1 – round exhaust gasket
- 2 – laminated packet paper gasket
- 2 – exhaust studs
- 2 – drain nuts
! Recommended configurations:
- Base with a Dellorto PHBH 30 carburetor and muffler of the Stratos line (straight or reverse) delivering from 23 to 26 hp.
- Performance with 35 carburetor and expansion muffler of the Stratos line delivering up to 30/32 hp.
!! The use of Stratos Oil SINT 2T specific for aluminum cylinders is recommended. !!! By installing the Stratos 226cc Lamellare, you might be also interested in: • Stratos brass head nuts set • long studs set for Stratos cylinder