Framework

Guide to Fitting the Front Disc Brake Nose Pump on Lambretta

Guida al Montaggio della Pompa Sotto Nasello

If you are looking to improve the effectiveness of your Lambretta’s braking system, installing a master cylinder under the nose for the external and/or Campagnolo front disc brake is an effective and relatively simple solution. This configuration offers a more direct and modulable response than traditional systems, improving the safety and performance of the Lambretta.

Materiali Necessari

Per un’installazione corretta e sicura, assicurati di avere a disposizione:

Assembly Procedure

  1. Vehicle preparation: Place the Lambretta on a stable support, removing any components that obstruct access to the nose.

  2. Installing the Mount: Attach the pump mount under the nosepiece, making sure it is well aligned and stable.

  3. Mounting the pump: Connect the pump to the bracket, fixing it firmly.

  4. Brake cable connection: Insert the cable lug into the hole in the pump lever and secure it with the cable end cap.

  5. Installing the return spring: Position the spring so that it ensures the lever returns fully after each actuation.

  6. Disc Brake Connection: Connect the brake cable to the disc brake mechanism, making sure it is tensioned correctly.

  7. Bleeding the System: Use the appropriate bleeding method for your system (manual or with specific equipment) to eliminate air from the circuit.

  8. Final check: Check that the lever is operated correctly and that the brake is effective.

Useful Tips

  • Compatibility: Make sure all components are compatible with your specific Lambretta model.

  • Maintenance: Check the oil level and brake cable condition periodically to ensure optimum performance.

  • Safety: Always wear appropriate protective equipment during installation and maintenance.

For a detailed visual guide on fitting the nose pump for the external and Campagnolo front disc brake on Lambretta, you can consult the following video:

This tutorial shows you step by step the process of installing the master cylinder under the nose, including useful tips for correct and safe assembly, as well as instructions for bleeding both the external disc brake and the Campagnolo disc brake, both applied on Lambretta.

Conclusion

Installing a front disc brake master cylinder is a significant improvement to your Lambretta, offering greater safety and control.

By following this guide and using quality components, you can achieve an efficient and reliable braking system.

For more information or to purchase the necessary components, visit our e-commerce.