S3 Chimera Twin Cylinder Conversion Kit with large crankcase 200 225 250
4,460.00€
Kit Conversione Bicilindrico Chimera carter grande (200 – 225 – 250) per modelli Lambretta LI S3, LIS, SX, TV3, DL.
Scarica il MANUALE DI MONTAGGIO del kit di conversione bicilindrico Chimera.
Available on backorder
PREORDINA: Tempo di consegna stimata 60/90gg dall’ordine.
Il Kit Conversione Bicilindrico Chimera carter grande 200 225 250 vi permette di ottenere un motore bicilindrico partendo dal motore originale della vostra Lambretta.
Compreso nel kit Conversione Bicilindrico Chimera:
- 1 Stabilized fusion block twin-cylinder conversion small-block crankcase 200 225 250
- 2 high speed bearings
- 1 Oil seal
- 2 specific Seegers
- 5 studs tailormade
- 1 Set of special sealing screws for casting block
- 1 Double Crankshaft complete with silver cages. coppery 107 mm rod and 58 mm stroke
- 1 Shaft collar with keys
- 1 Zero balanced CNC DL cone flywheel
- 1 Disulphide impeller
- 1 Venturi aluminum cone with screws and washers
- 1 12-pole stator 2 Ducati Energia with pick-ups
- 2 Ducati Energia variable advance electronic CDI coils
- 1 Ducati Energia voltage regulator
- 2 Flywheel cable outlet plates
- 1 specific Plug&Play wiring for twin-cylinder
- 1 Stainless steel coil and regulator support bracket
- 1 Throttle cable splitter
- 2 Spark plug wires
- 2 NGK shielded spark plug caps
- 2 Flywheel flange gaskets
- 8 studs per cylinder
- 8 Self-centering brass bushings for cylinder head
- 2 CNC cylinder heads with dome ø70,00
- 8 Brass head nuts
- 1 Fiberglass plus Kevlar reinforced cooling cap
- 1 Set of cooling cap fixing screws
- 1 Fuel hose splitter “Y”
- 1 Engine pin complete with bushings and offset bushings
- 1 Avional CNC rear wheel spacer
- 1 Set of specific screws for spacer
- 1 Carter cutting template
- 2 Cylinder cutting templates (right and left)
- 1 cutting disc
- 1 emery disc
- 1 Right side footpeg support kit
- 1 Rear shock absorber support
ATTENTION: The twin-cylinder conversion kit can only be installed with LI S3 LIS DL rear drum
CHIMERA – TWIN CONVERSION KIT BICILINDRICO: presentation
SHIPPING AND PACKAGING COSTS
If you do not see any emails, you can contact us by email at ordini@scooterthefero.com or via chat directly on the site.
Delivery service - Italy 0,1 - 30 kg
- ZONE 1: Mantova and Verona - Euro 10,00
- ZONE 2: Calabria, Sicilia and Sardegna - Euro 16,00
- ZONE 3: Cities and/or Regions not indicated in the other zone - Euro 12,00
Cash on delivery surcharge EURO 5.00
Delivery service - Europe 0,1 - 30 kg
- Austria, Belgio, Lussemburgo, Paesi Bassi and Germania - Euro 20,00
- Francia and Spagna - Euro 30,00
- Irlanda and Portogallo: Euro 40,00
To find out the cost of the shipping service to European countries not indicated above, write an email to info@scooterthefero.com.
Delivery service - Extra Europe
If you want to buy a purchase and the delivery is in a country outside the European Union (including the United Kingdom), write us an email at info@scooterthefero.com.
We will send you a quote with prices net of Italian VAT and the relative shipping costs. Any costs of VAT and customs duties will be borne by the recipient.
The customer is responsible for all possible additional expenses (stocks, shipments returned to the sender, etc.) caused by incomplete and / or incorrect personal data or addresses. The same conditions are also applied in the case of promotions in which Scooter Il Fero offers free shipping. For this reason we invite our kind customers to always provide personal data, shipping addresses, telephone numbers and email addresses currently in use.
