The rear disc brake V2 STF316 has been designed to meet sporty and exciting demands. Entirely made of stainless steel, it provides: modularity, high performance and safe braking compared to the traditional drum system. Main features: • it is not necessary to remove the drum brake system; • easy assembly; • no modification / welding of your Lambretta is needed Kit content:
- brass bushing for brake pedal • pump support to brake pedal • specific spring for brake pedal • calibrated arm for pump pedal • High capacity pump with tank • pump tank support • Disc SS316 CNC support from solid • Tightening key for disk support • safety nut retainer for disk support • disk with AISI 420 stainless steel core heat treated by 36 RH tempering with hard anodizing protection • CNC front fastening with anti-vibration, spring washer and lock washer • bracket clamp support by CNC and hand finishing. High speed bearing in the rear and self-lubricating bushing in the front • high performance sporting caliper with double cylinder • disk support wearing. Two versions available: 0.5 mm and 1.00 mm • self-lubricated bushing flange wearing. 1mm here included. • aeronautical pipe, high-flow, close mesh, with polished SS316 connections
Pre-installation recommendation: V2 STF316 is dimensionally designed in combination with increased silent block and pin engines. Consigli pre-montaggio The use of SX DL silent block is advisable. For installation manual CLICK HERE ! MADE IN ITALY